|
Quanzhou Haitong Electronic Co., Ltd.
|
|
|
|
|
|
|
|
Trade Leads
|
|
Sell Switching Power Supply
|
|
[Sell] Sell Switching Power Supply
|
|
Subject: Sell Switching Power Supply
|
|
Effective Period: 1 month
|
|
Date-Time: 2017/6/28
|
|
|
1.Input Characteristics:
a.Input voltage:110-230VAC¡À15%(90VAC-264VAC)
b.Input Frequency:50/60HZ¡À10%(45HZ--66HZ)
c.Fuse:A frse is included in the AC line circuit.The fuse rating is as to prevent
Safety hazard in the event of an intemal failure of the power supply.
d.Inrush Current:<20A/ms.
e.Earth Leakage Current:The earth leakage current does not exceed 0.25mA at 264VAC
66Hz Input and the Min load condition.
f.Efficiency:75%min,at 220VAC input full load test.
2.Output Specification
a.Output voltage:the +16V and +23V outputs are used for LNBP so that either of them
shall be loaded at a time
output1 +3.30v /300-1500mA/+3.14V-3.46V(
voltage limit)/5%tolerance/4.95Watt/
output2 +5.00/50-800mA/+4.75-5.25(
voltage limit)/5%tolerance/4.0Watt
output3 +12.0/0-100mA/+11.4-12.6(
voltage limit)/5%tolerance/1.2Watt
output4 +16.0/0-450mA/+15.0-17.0(
voltage limit)/7%tolerance/7.2Watt
output5 +23.0/0-450mA/+21.8-24.2(
voltage limit)/5%tolerance/10.35Watt
output6 +30.0/0-20mA/+27.9-32.1(
voltage limit)/7%tolerance/0.6Watt
b.Output Ripple:Measurement of ripple includes a 0.1uF ceramic capacitor and a 47uF
electrolytic capacitor at the output of measuring oscilloscope.Line ripple:measured
with an oscilloscope with a bandwidth of 100 MHZ.Switching ripple:measured
with an oscilloscope with a bandwidth of 100MHZ.
Output1\2\3:50mV at peak-peak line Ripple;200mV at peak-peak Switching Ripple.
Output4\5\6:100mV at peak-peak line Ripple;200mV at peak-peak Switching Ripple.
c.Turn on delay time:1S max,at normal line full load.
d.Hold on time:20mS min,at 220Vac line max load.
e.Over Current Protection:The power supply protects itself from any over current
conditon.
f.Thermal Protection:The power supply Protects itself down if it overheats.It resets
itself with no operator inventon.
g.Shorted Output:All output with stand an indefinite short to Gnd, under any load
condition on the other output.
h.HI-pot Test:Dielectric Withstand Voltage ACinputL.N to all output connectors 3000VAC
for 1 minute TEST.
i.Burn-In:All power supplies will go through 4 hours of burn-in at 40 temperature
chamber under the nominal input and 80% of the maximum load condition,before delivery
to AMP.
j.PCB Dimensions and Weight:Size:144*59*26(L*W*H).Weight:0.20kg MAX
|
|
|
| Contact Information |
| Company Name: |
Quanzhou Haitong Electronic Co., Ltd. |
| Contact Person: |
Mr. Zhenfan Fu |
| Address: |
No. 13B, Jiangnan High-tech Electronical Information Industrial Park, Licheng District,Quanzhou,Fujian,China. |
| Zip: |
362000 |
| Telephone: |
|
| Fax: |
| E-mail: |
| Web Site: |
|
|
|
|
|
|
|
